-- Lenel Systems International, Inc.
-- Last Updated: 10/17/2003

LENEL-MIB DEFINITIONS ::= BEGIN

IMPORTS
	enterprises, OBJECT-TYPE, OBJECT-IDENTITY
		FROM SNMPv2-SMI
		
	TRAP-TYPE
		FROM RFC-1215;
		
lenel OBJECT IDENTIFIER ::= {enterprises 15714}

onGuardHardwareEvent TRAP-TYPE
	ENTERPRISE lenel
	DESCRIPTION	"OnGuard Hardware Event"
	::= 1
	
onGuardSoftwareEvent TRAP-TYPE
	ENTERPRISE lenel
	DESCRIPTION	"OnGuard Software Event"
	::= 2

onGuard OBJECT IDENTIFIER ::= {lenel 1}

event OBJECT IDENTIFIER ::= {onGuard 1}     

unknownEvent OBJECT IDENTIFIER ::= {event 1}

previousEventData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Previous data from an unknown OnGuard event. This 
				variable contains the reported property and value in the
				following format:	<Property>: <Value>"
	::= {unknownEvent 1}

currentEventData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from an unknown OnGuard event. This variable
				contains the reported property and value in the 
				following format:	<Property>: <Value>"
	::= {unknownEvent 2}

hardwareEvent OBJECT IDENTIFIER ::= {event 2}

eventDescription OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A human readable, brief description of this event."
	::= {hardwareEvent 1}

datetime OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The time when this event occured."
	::= {hardwareEvent 2}

securityEvent OBJECT IDENTIFIER ::= {hardwareEvent 3}

serialNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A number that uniquely identifies the instance of the event for a particular panel."
	::= {securityEvent 1}

panelID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the panel where this event originated."
	::= {securityEvent 2}

deviceID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the device where this event originated."
	::= {securityEvent 3}

secondaryDeviceID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the secondary device where this event originated."
	::= {securityEvent 4}

id OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID that uniquely identifies the type of this event."
	::= {securityEvent 5}

segmentID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the segment that the panel is in."
	::= {securityEvent 6}

accessEvent OBJECT IDENTIFIER ::= {securityEvent 7}

accessResult OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The level of access that was granted that resulted from reading 
							the card. Possible values include 'Other', 'Unknown', 'Granted',
							'Denied', and 'Not Applicable'."
	::= {accessEvent 1}

cardholderEntered OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Boolean value indicating whether entry was made by the 
							cardholder.	Non-zero value indicates true."
	::= {accessEvent 2}

cardNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The badge ID for the card that was read, if available."
	::= {accessEvent 3}

issueCode OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The issue code for the card that was read, if available."
	::= {accessEvent 4}

facilityCode OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The facility code for the card that was read, if available."
	::= {accessEvent 5}

duress OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Boolean value indicating whether this card access indicates 
							an under duress/emergenct state. Non-zero value indicates true."
	::= {accessEvent 6}

isReadableCard OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Boolean value indicating whether the card could be read. Non-zero
							value indicates true. If it could not be read (due to an invalid 
							card format or damage to the card), the other properties of this 
							class relating to the card information will be null."
	::= {accessEvent 7}

areaEnteredID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the area that was entered, if any."
	::= {accessEvent 8}

areaExitedID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the area that was exited, if any."
	::= {accessEvent 9}

floor OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The floor at which the card access event was generated, if any."
	::= {accessEvent 10}

assetID OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the asset related to this event, if any."
	::= {accessEvent 11}
	
intercomEvent OBJECT IDENTIFIER ::= {securityEvent 8}

intercomData OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Intercom data associated with this event, such as the station 
							ID for the station that was called."
	::= {intercomEvent 1}

lineNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Line number associated with this event"
	::= {intercomEvent 2}

videoEvent OBJECT IDENTIFIER ::= {securityEvent 9}

channel OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The physical channel the camera is connected to that is creating
							this event."
	::= {videoEvent 1}

endTime OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The time that the video event ended."
	::= {videoEvent 2}

startTime OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The time that the video event started."
	::= {videoEvent 3}

transmitterEvent OBJECT IDENTIFIER ::= {securityEvent 10}

transmitterID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID of the transmitter that generated this event."
	::= {transmitterEvent 1}

transmitterBaseID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The base ID of the transmitter that generated this event."
	::= {transmitterEvent 2}

transmitterInputID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The ID associated with the transmitter input."
	::= {transmitterEvent 3}

verifiedAlarm OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Boolean value indicating whether the transmitter message is known
							to be verified (R signal received by an RF receiver)."
	::= {transmitterEvent 4}

fireEvent OBJECT IDENTIFIER ::= {securityEvent 11}

troubleCode OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Trouble code for this event. Set to -1 if there is no trouble
							code associated with this event."
	::= {fireEvent 1}

statusChangeEvent OBJECT IDENTIFIER ::= {securityEvent 12}

newStatus OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "New status of the device."
	::= {statusChangeEvent 1}

oldStatus OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Old status of the device."
	::= {statusChangeEvent 2}

communicationsStatus OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Communication status for device."
	::= {statusChangeEvent 3}

functionExecEvent OBJECT IDENTIFIER ::= {securityEvent 13}

functionID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Function ID."
	::= {functionExecEvent 1}

functionInputArguments OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Input arguments to the function."
	::= {functionExecEvent 2}

initiatingEventID OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Event identifier that caused the function to be initiated."
	::= {functionExecEvent 3}

type OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The type identifier for the event."
	::= {securityEvent 14}
	
eventText OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The event text associated with the event."
	::= {securityEvent 15}
	
alarm OBJECT IDENTIFIER ::= {hardwareEvent 4}

alarmDescription OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A human readable brief description of the alarm associated	with
							the event."
	::= {alarm 1}

priority OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The priority configured for the alarm associated with this event."
	::= {alarm 2}

mustAcknowledge OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Boolean value indicating whether or not this alarm must be 
							acknowledged. A value of 1 means the alarm must be Acknowledged."
	::= {alarm 3}

isActive OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Boolean value that indicates if this is an active alarm. A value
							of 1 indicates that the alarm is active."
	::= {alarm 4}

eventParameterDescription OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A human readable brief description of the event parameter."
	::= {alarm 5}


softwareEvent OBJECT IDENTIFIER ::= {event 3}

instanceCreation OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The specified object has just been created."
	::= {softwareEvent 1}

instanceModification OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The specified object has just been modified."
	::= {softwareEvent 2}

instanceDeletion OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The specified object has just been deleted."
	::= {softwareEvent 3}

element OBJECT IDENTIFIER ::= {softwareEvent 4}

previousElementData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a element."
	::= {element 1}

currentElementData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a element."
	::= {element 2}

person OBJECT IDENTIFIER ::= {element 3}

previousPersonData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a person."
	::= {person 1}

currentPersonData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a person."
	::= {person 2}

cardholder OBJECT IDENTIFIER ::= {person 3}

previousCardholderData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a cardholder."
	::= {cardholder 1}

currentCardholderData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a cardholder."
	::= {cardholder 2}

visitor OBJECT IDENTIFIER ::= {person 4}

previousVisitorData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a visitor."
	::= {visitor 1}

currentVisitorData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a visitor."
	::= {visitor 2}

badge OBJECT IDENTIFIER ::= {element 4}

previousBadgeData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a badge."
	::= {badge 1}

currentBadgeData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a badge."
	::= {badge 2}

account OBJECT IDENTIFIER ::= {element 5}

previousAccountData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a account."
	::= {account 1}

currentAccountData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a account."
	::= {account 2}

multimediaObject OBJECT IDENTIFIER ::= {element 6}

previousMediaObjectData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from a previous instance of a multimedia object."
	::= {multimediaObject 1}

currentMediaObjectData OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Data from the current instance of a multimedia object."
	::= {multimediaObject 2}

END